GPS500 GPS Antenna

   


Features

■ Using multi feed point design to ensure the superposition of phase center and geometrical center which could minimize the influence of measurement error to lowest range.
■ Antenna unit gain is high, the direction of the beam width, to ensure that the low elevation signal to accept the effect, in some block more serious occasions can still receive satellite.
■ With anti-multipath choke plate, effectively reduce the impact of multi-path on the measurement accuracy.
■ With waterproof, anti-UV cover, for the antenna to provide long-term work in the field to provide protection.

Specifications
Antenna Specification
Frequency Range: GPS L1/L2, GLONASS L1/L2, Beidou B1/B2/B3
Impedance: 50 Ohm
Polarization: RHCP
Axial Ratio: ≤ 3 dB
Azimuth Coverage: 360°
Output VSWR: ≤ 2.0
Gain at Zenith: ≥ 5.5 dBi
Phase Center Error: ± 2 mm
Mechanical Specification
Dimension: φ152 x 62.2 mm
Connector: TNC Female
LNA Specification
LNA Gain: 40±2 dB
Noise Figure: ≤ 2.0 dB
Output VSWR: ≤ 2.0
Ripple: ± 2dB
Drain Voltage: 3.3--12 VDC
Current Consumption: ≤ 45 mA
Group Delay: ≤ 5 ns
Environmental Specification
Operating Temperature: -40°C to +85°C
Storage Temperature: -55°C to +85°C
Humidity: 95% Non-Condensing